Hey, I'm new to this so I'll try give as much info as I can. I have a ford focus style 2008 1.6 tdci 110bhp, I was driving down the motorway when I lost power in 4th And 5th gear, my breakdown service took my car to a local garage and told me my turbo had gone. They replaced my turbo which cost m I've found plenty of focuses with the 1.6 diesel engine in my area (all of them manuals, I don't like automatics) but to be honest I've heard really bad things about both the engine and the car (engine failures, injector failures, bits and bobs breaking in the car etc).So anybody who's owned one of these bad boys had any serious problems? Ford mondeo 1.6 tdci 2012 engine malfunction and traction light on Ford mondeo 1.6 tdci 2012 engine malfunction and traction light on Actually I had a focus that The DW10BTED4 engine uses a Garrett GT1749V turbine, a very common model used in many powertrains. It should be noted that interchangeability between 2.0 HDi and 2.0 TDCi is not provided. Turbines identical to each other are installed on Volvo models and Ford cars (Focus, Kuga, C-Max). I have a 2006 Ford Focus 1.6 TDCI. When i keep a steady speed the engine chugs and the rev gauge jumps up and down. I took it to my local ford garage and they found oil in the MAF sensor and cleaned it out. For a few weeks it was running fine until it slowly got back to the way it was. Some help needed please! I have a Focus Estate MK2 1.6 TDCi, and recently it's developed a fault where after taking engine revs over around 2000rpm, and then depressing the clutch to change gear, the engine will stall. It can go a little over 2000, but not much. When it stalls, the engine restarts, but it has to turn over a few times before it Well that's kinda my thoughts too, and, I've happened to source a straight though bypass dpf pipe for £235 delivered. I'd just have to swop back once a year for the mot. 1.6 Tdci Emissions Failure. My father's 07 Focus 1.6 TDCi failed its MOT emissions test badly (9.99 PPM which was the maximum reading of the tester!). The limit is 3.0! I'm not very familiar with this engine but checked the air filter, stuck the endoscope into the inlet manifold (a bit grubby in there) and checked for trouble codes. rWpOkd.

ford focus 1.6 tdci engine problems